REFRACTORY CHARACTERISTICS OF KWI CLAY DEPOSIT IN PLATEAU STATE
Abstract
The Kwi clay deposit in Plateau State has been investigated to determine the chemical and mineralogical composition, refractoriness, apparent and bulk density, dry strength and dry shrinkage. Chemical and mineralogical composition were determined by x-ray analysis, density was determined using the pyrometric cone equivalence technique. Result obtained shows the clay to be composed of 31.69% Al2O3 and 37.63% SiO2, placing the clay in the fireclay class of kaolins. The Fe2O3 content is notably high for kaolins (14.48%). The interesting composition of the clay is certainly the high TIO2, content, 2.97%. Mineralogical composition analysis shows the clay to be mainly kaolinite 88.88%. Apparent porosity is 39%, density at high temperature is 2.54g/cm3 while dry strength and dry shrinkage at high temperature (>13000C) are 35.20MPa and 8.74% respectively. Refractoriness was found to be 1660°C. The clay is therefore recommended for ferrous and non-ferrous refractory application after reducing Fe2O3 content and more importantly for titanium extraction.