EXPERIMENTAL INVESTIGATION OF THE EFFECT OF ASPECT RATIO ON COLLAPSE OF THIN SLABS UNDER POINT LOADS

Authors

  • M. A. SALAU Department of Civil Engineering, University of Lagos, Akoka Yaba. Author
  • O. M. SADIQ Department of Civil Engineering, University of Lagos, Akoka Yaba. Author

Abstract

Three groups of thin slabs with varying end conditions and aspect ratios were cast, cured and tested in the laboratory in order to investigate the effect of aspect ratio on the failure mechanism as well as the ultimate failure load of thin slabs when subjected to concentrated point loads.

Three types of slab edge conditions were considered viz: (i) All the four edges have monolithic edge beams, (ii) All the four edges have non-monolithic edge beams, and (iii) two opposite longer sides have non-monolithic edge beams, the other two edges being free. For all these cases, the aspect ratios were varied between 0.33 and 2.67.

All the thin slabs tested developed fan mechanisms at failure. The aspect ratio of the slabs has a linear relationship with the circumference of the fan developed. The ultimate load at failure of the slab had a non-linear relationship with the circumference of the fan developed.

Downloads

Published

1998-03-31