CHARACTERIZATION AND DETERMINATION OF THE INDUSTRIAL POTENTIAL OF OSARA DOLOMITE DEPOSIT

Authors

  • E. E. NNUKA Department of Mechanical Engineering, University of Agriculture, Makurdi. Author
  • F. OLAREWAJU Department of Mechanical Engineering, University of Agriculture, Makurdi. Author

Abstract

Osara dolomite deposit has been studied in this research work to investigate the chemical composition, sintering point, cold crushing strength, differential thermal analysis (D. T. A.), bulk density, porosity, specific gravity, water absorption, abrasion resistance and thermal shock resistance. Chemical composition was determined using the wet analysis technique, sintering point was determined by the heating and piercing method, cold crushing strength was measured using a mechanical strength testing machine. D. T. A. was analysed on the equipment model 404-5 while bulk density, porosity, specific gravity and water absorption were determined by the immersion technique. Abrasion and thermal shock resistance were determined using the Moh's hardness testing kit and the heating and cooling techniques respectively.

4 It was established that osara dolomite belongs to the low flux group of dolomite refractory and that the composition is essentially 34 per cent lime (CaO), 16 per cent periclase (MgO) and 46 per cent volatile material. The sintering point is 1500°C. D. T. A. shows that osara dolomite contains magnesite (MgCO3) and calcite (CaCO3), that the endothermic reactions take place at 780°C and 880°C respectively and correspond to the liberation of carbon dioxide gas during the decomposition of the two minerals and the formation of periclase and lime respectively. The established characteristics confirm the sample as dolomite. Comparism of the characteristics of osara dolomite to those of major deposits in England shows that it constitutes a good refractory material. The firing colour and the setting temperature indicate its suitability in white ware and porcelain manufacture. The chemical properties indicate its potential in chemical, fertilizer, paint, cement, oil and other industries. It is, therefore, recommended that osara dolomite be utilized in the enumerated industries and as a refractory material for lining the walls of basic iron and steel furnaces.

Downloads

Published

1999-06-30