HEURISTIC MODEL OF A FRICTION AND WEAR TRIBOMETER
Abstract
A heuristic ideation technique is applied to evolve a bench, table-type pin on disc tribometer. For the same test load and specimen, eighteen (18) sliding speeds (ranging from 0.14 to 9.75m/s) could be simulated primarily under dry conditions but adaptable to boundry and mixed lubrication modes. The maximum end load is 995N on each pin, that is 1990N on test specimen. The friction is measured with aid of a tensometric beam load cell while wear is by weight loss assessment.
The optimisation criteria include: simplicity of operation, maintainability, laboratory ergonometrics, avail-ability of materials, ease of manufacture, reliability and reproducibility of test results, low weight and cost, small dimensions of machine, etc.