YIELD STRESS VARIATION ACROSS THICKNESS FOR STEEL (HC SS316) SPECIMEN HOT ROLLED AT LOW REDUCTION AND LOW STRAIN RATES
Abstract
For the hot flat rolling of HC SS316 at low 13 reduction (r ~ 10%) and low strain rates (ε̇~0.08 s-1) a new method of estimating the material mean yield strength(σ g *) is hereby proposed. It combines the temperature, strain, as well as the composition effects and was obtained from equations based on hot torsion isothermal tests under similar conditions.
The surface third element across thickness has a strain increase of ~15% increase of ~1 x 104 in the Zener- Hollomon parameter, Z value and a decrease of ~250°C in the rolling temperature (Tm). This corresponded to an increase of ~200Nmm-2in the yield strength of the surface element and an increase of ~35% in the material mean yield strength σ g * (YKP or YKG). This was found to be due to the temperature, composition and rolling condition effects.
An almost 3 times increase in the yield strength of the surface material compared to the centre material confirm the reverse sandwich (or rolling chilling) effect for hot flat rolling at low strain rates.